25 years of experience
Easy to install
Long-term investments

TENAPORS PRODUCTS FOR WALLS

When house foundations inserted, the next step is construction of the walls. Choosing exterior wall material for house, it is important to pay attention to insulating material characteristicsl.

DOBELES PANELIS ST

DOBELES PANELIS ST

Partition components of the „Dobeles panelis” system are polystyrene EPS panels.

Partition components of the „Dobeles panelis” system are polystyrene EPS panels. The panels are 0.6 metres wide, while the length depends on the height of the storey, with a maximum length of 12 metres. The panels are 60, 100 or 120 mm thick, but there also are panels for custom partitions up to 200 mm thick. The thickness of partitions is selected depending on the soundproofing requirements and, if the partitions separate heated rooms from non-heated rooms, also depending on the thermal requirements. There are five channels intersecting the panels lengthwise, and two perforated galvanised steel U profiles 60 to 120 mm high have also been built in to increase the loadbearing capacity, and their perforation enables for engineering communications to be installed through the panels. The profiles are also used for attaching sheet-like or board finish materials. A partition constructed of such panels can be plastered from both sides or finished with gypsum board.

DOBELES PANELIS ST Main ADVANTAGES

DOBELES PANELIS ST Main ADVANTAGES


Major construction and reconstruction advantages presented by the system «Dobeles panelis»:

  • the light weight of the elements provides the possibility to construct low-storied reinforced concrete structure buildings without the necessity to use heavy equipment (cranes, etc.) and it has considerable impact on the building costs, besides the noise level on the construction site is reduced;
  • labour intensity of the construction system with stayin- place expanded polystyrene forms is considerably lower than that of any other construction technology;
  • the system is best suited in cases when it is necessary to build additional new storeys in existing buildings thus upgrading the obsolete housing fund;
  • the excellent heat insulation characteristics and low water penetrability allows to perform concrete casting also at negative temperatures without heating concrete, this feature makes simplifies building process and reduces its costs;
  • broad selection of architectural solutions is provided in both reconstructing old buildings and constructing new ones because structural elements can be manufactured of different forms and length;
  • the size of construction sites are minimizes thus providing the possibility to perform construction and reconstruction works in a densely constructed area;
  • the speed of construction can reach up to four storeys per month.

DOBELES PANELIS ST Usage

DOBELES PANELIS ST Usage


Ready-made polystyrene panelling for partition walls

DOBELES PANELIS ST Technical data

color

none

packaging


DOBELES PANELIS ST Methodical instructions

STORAGE

Products must be stored, with the product placed on a smooth flat surface of the supporting surface, in dry conditions, at temperatures not exceeding 70 ° C.

Long-term product storage on uneven surfaces or in a vertical position may cause deformation.

The products should not be stacked on top of anything, as well as packaged products should not be stacked one on the other.

There shall be no contact with solvents.

Keep away from children!

DOBELES PANELIS ST For individual orders

Regarding to the client's project we do calculation of the required quantity of the product and the cost of project (The maximum possible board size 4m x 1m x 1,2 m)

+371 637 071 58
tenapors@tenaxgrupa.lv

Regarding to the client's project we do calculation of the required quantity of the product and the cost of project (The maximum possible board size 4m x 1m x 1,2 m)

+371 637 071 58
tenapors@tenaxgrupa.lv