TENAX W EPS S
Lightly profiled sandwich panels with EPS core
Sandwich panels TENAX are manufactured in a wide range of thickness, with different thermal insulation cores, panel joints and profiling of the steel facings, all of which have a significant influence on the performance characteristics and the appearance of the structure. Sandwich panels TENAX with expanded polystyrene (EPS) core are particularly suitable for the lightweight structures with good fire safety and thermal performance, where the most economic solution is required. Together with the sandwich panels TENAX the customer can also benefit from the panel design and calculation services, as well as instructions, detail drawings, accessories and materials necessary for panel handling and assembly.
TENAX W EPS S Main ADVANTAGES

TENAX W EPS S Main ADVANTAGES
• Custom made solutions
• Short delivery time (3-4 weeks)
• Engineering and designing support to clients
• Project management support during construction
• Less cutting work and waste at building site (available panel widths are from 0,6 till 1,2 m)
• Easy to replace the insulation core of panels after project design (for example, from MW to PIR)
• Panel joints are fully compatible with each other (MW, PIR, PUR and EPS)
• Panels are delivered together with complementary elements (flashings, screws etc.)
• More than 10 years’ experience in production, execution and delivering of goods
TENAX W EPS S Usage
Lightly profiled sandwich panels TENAX W are designed for horizontal and vertical assembly, especially for:
- internal and external walls
- ceilings
- cold storage
The storage, handling and assembly of the sandwich panels must be carried out strictly in accordance with the manufacturer’s instructions (see Technical Guidelines).

TENAX W EPS S Declarations
TENAX W EPS S Methodical instructions
STORAGE
Products must be stored, with the product placed on a smooth flat surface of the supporting surface, in dry conditions, at temperatures not exceeding 70 ° C.
Long-term product storage on uneven surfaces or in a vertical position may cause deformation.
The products should not be stacked on top of anything, as well as packaged products should not be stacked one on the other.
There shall be no contact with solvents.
Keep away from children!
1. General Description
2. Strength and Deformations
3. Fire safety
4. Heat Engineering
5. Building acoustics
6. Transportation and Storage
7. Installation of Sandwich Panels
8. Fixation of Panels and Recommended Fasteners
9. Cover Plates and Auxiliary materials
10. Junctions
11. Maintenance and Repairs