25 years of experience
Easy to install
Long-term investments

Tenapors intermediate insulation

Tenapors offers a choice of high-quality intermediate construction and insulation, that holds sound and provided a warm floor in cold winter.

TENAPORS TERMO PLUS

TENAPORS TERMO PLUS

Thermal insulation sheets for heated floors

Foamed polystyrene sheets TENAPORS TERMO PLUSS are an eco-friendly, inexpensive and efficient insulation material for quick laying of water-heated floors. The sheets are made of a porous material with closed pores and flame retardant additives (substances that suppress combustion). They are resistant to weak acidic, alkaline and saline solutions but non-resistant to aromatic and halogen containing solvents, esters, ketones, oils or lubricants (e.g. toluene, solvent, ethyl acetate, acetone, etc.). One side of the sheets has cylindrical grooves for easy and fast arrangement and fastening of heating pipes. The sheets are intended for heating pipes in ∅ 16–18 mm. The top surface of the sheet is laminated with polystyrene film (0.12 mm thick). These sheets may be continuously used as a thermal insulation material at ambient temperatures of up to + 80°C.

TENAPORS TERMO PLUS Main ADVANTAGES

TENAPORS TERMO PLUS Main ADVANTAGES


 Arrangement of water-heated floors using TENAPORS TERMO PLUSS sheets:

  • Preparing the base of the floor surface (clean the base from any dirt) the floor base must be smooth and even
  • Laying of an additional layer of thermal insulation(determined during the design process) TENAPORS EPS shall be used as an additional layer of thermal insulation
  • Arranging TENAPORS TERMO PLUSS sheets: 
    • Insert a distortion tape along the entire perimeter of the room
    • Correctly arrange heating pipes (determined during the design process)
    • Cast fibro concrete poured on top of the arranged piping
    • The thickness of the concrete layer above the heating pipes shall be 35–40 mm
    • Arrange the main floor
    • The main floor may be laid only after the concrete has hardened completely (approximately after a month)

TENAPORS TERMO PLUS Usage

TENAPORS TERMO PLUS Usage


Water-heated floors may be installed only in buildings or flats with their own boiler. The sheets are used as a thermal insulation material for water-heated floors. The water-heated floors with TENAPORS TERMO PLUSS sheets may be assembled on the ground, concrete decks, and also on concrete base floors. If necessary, TENAPORS EPS should be used as an additional thermal insulation material.

TENAPORS TERMO PLUS Declarations

TENAPORS TERMO PLUS Technical data

COLOR

Red

PACKAGING


TENAPORS TERMO PLUS Methodical instructions

STORAGE

Products must be stored, with the product placed on a smooth flat surface of the supporting surface, in dry conditions, at temperatures not exceeding 70 ° C.

Long-term product storage on uneven surfaces or in a vertical position may cause deformation.

The products should not be stacked on top of anything, as well as packaged products should not be stacked one on the other.

There shall be no contact with solvents.

Keep away from children!